Product Detail
Epoxicote Ultra is a two-component, 100% solids, cyclo-aliphatic hybrid coating system designed for maximum durability and performance. Engineered for superior adhesion to concrete substrates, it delivers exceptional flexibility, self-leveling properties, and extended working time. With excellent chemical resistance and low odor, Epoxicote Ultra is ideal for high-demand environments requiring the highest level of performance.
Applications
- High-demand industrial floors
- Large interior facilities
- Warehouses and production areas
- Commercial and operational spaces
- Environments requiring maximum durability
Key Features
- 2-part 100% solids cyclo-aliphatic hybrid system
- 45–60 minute pot life for extended working time
- Low odor formulation suitable for indoor use
- Ultra-smooth, self-leveling finish
- Excellent chemical resistance
- Compliant nationwide with near zero VOC
Explore Other Epoxicote Systems
- Looking for enhanced value? Choose Epoxicote Pro
- Need a cost-effective solution? Explore Epoxicote Core Standard
- Need faster return to service? Consider Epoxicote Core Rapid
- Need slip resistance? Choose Epoxicote Core Anti-Slip
Specifications
| Usage Interior/Exterior: | Interior |
| Finish: | High gloss, smooth |
| Suitable for: | Concrete floors |
| Primer Required?: | No. Can use Powerfloat Primer on bare concrete for extra adhesion if desired. Recommended when proper surface grinding is not possible. |
| Recommended Number of Coats: | Typically one is sufficient. Two may be necessary for high traffic areas. |
| Pot Life: | 45-60 minutes depending on temperature. |
| Curing Time: | At 70°F, 12-16 hours for light traffic, 36-48 hours for vehicle traffic, full cure in 7 days. Recoat time 12 hours minimum and 48 hours maximum. Calculated at 70°F-80°F and 50% relative humidity. |
| Coverage: | Approximate spread rate with a roller is 200 square feet per gallon at 8 mils. When applied by squeegee, 100 square feet per gallon at 16 mils. |
How to Apply
Surface Preparation: Concrete
The concrete surface must be free of all dirt, grease, oil, fats, and other contamination. Remove surface contamination by cleaning with Rust-Oleum® Professional Cleaners Concentrated Cleaner Degreaser, detergent, or other suitable cleaner. Rinse thoroughly with clean, fresh water and allowed to dry.
Mixing
Low speed drill and spiral mixing wand. Must pre-mix both components prior to use. Important: Hand mixing will produce inconsistent results and is not an approved method
Note: 3-gallon kits are packaged in Watco’s new and exclusive All-In-One packaging. Both A and B components are shipped together inside an outer 5-gallon pail that can be used for combining both components at the application site. Must mix with Watco's Narrow Spiral Paint Mixer (sku 388011) to premix the individual components within the kit.
Application
Apply only when air, material and floor temperatures are between 60-90°F (15-32°C) and the surface temperature is at least 5°F (3°C) above the dew point and RH less than 85%.
EpoxiCote Ultra can be applied by roller working from a roller pan or it can be poured directly onto the floor in a ribbon and spread out with a rubber squeegee to spread the material out and achieve the 100 sq. ft./gal. spread rate. Back roll the material smooth using a ⅜" lint free roller with a phenolic core to smooth out the finish. If rolling from a tray, apply at 8 mils/200 sq. ft./gal. spread rate.
Epoxicote Ultra is a two-component, 100% solids, cyclo-aliphatic hybrid coating system designed for maximum durability and performance. Engineered for superior adhesion to concrete substrates, it delivers exceptional flexibility, self-leveling properties, and extended working time. With excellent chemical resistance and low odor, Epoxicote Ultra is ideal for high-demand environments requiring the highest level of performance.
Applications
- High-demand industrial floors
- Large interior facilities
- Warehouses and production areas
- Commercial and operational spaces
- Environments requiring maximum durability
Key Features
- 2-part 100% solids cyclo-aliphatic hybrid system
- 45–60 minute pot life for extended working time
- Low odor formulation suitable for indoor use
- Ultra-smooth, self-leveling finish
- Excellent chemical resistance
- Compliant nationwide with near zero VOC
Explore Other Epoxicote Systems
- Looking for enhanced value? Choose Epoxicote Pro
- Need a cost-effective solution? Explore Epoxicote Core Standard
- Need faster return to service? Consider Epoxicote Core Rapid
- Need slip resistance? Choose Epoxicote Core Anti-Slip
| Usage Interior/Exterior: | Interior |
| Finish: | High gloss, smooth |
| Suitable for: | Concrete floors |
| Primer Required?: | No. Can use Powerfloat Primer on bare concrete for extra adhesion if desired. Recommended when proper surface grinding is not possible. |
| Recommended Number of Coats: | Typically one is sufficient. Two may be necessary for high traffic areas. |
| Pot Life: | 45-60 minutes depending on temperature. |
| Curing Time: | At 70°F, 12-16 hours for light traffic, 36-48 hours for vehicle traffic, full cure in 7 days. Recoat time 12 hours minimum and 48 hours maximum. Calculated at 70°F-80°F and 50% relative humidity. |
| Coverage: | Approximate spread rate with a roller is 200 square feet per gallon at 8 mils. When applied by squeegee, 100 square feet per gallon at 16 mils. |
Surface Preparation: Concrete
The concrete surface must be free of all dirt, grease, oil, fats, and other contamination. Remove surface contamination by cleaning with Rust-Oleum® Professional Cleaners Concentrated Cleaner Degreaser, detergent, or other suitable cleaner. Rinse thoroughly with clean, fresh water and allowed to dry.
Mixing
Low speed drill and spiral mixing wand. Must pre-mix both components prior to use. Important: Hand mixing will produce inconsistent results and is not an approved method
Note: 3-gallon kits are packaged in Watco’s new and exclusive All-In-One packaging. Both A and B components are shipped together inside an outer 5-gallon pail that can be used for combining both components at the application site. Must mix with Watco's Narrow Spiral Paint Mixer (sku 388011) to premix the individual components within the kit.
Application
Apply only when air, material and floor temperatures are between 60-90°F (15-32°C) and the surface temperature is at least 5°F (3°C) above the dew point and RH less than 85%.
EpoxiCote Ultra can be applied by roller working from a roller pan or it can be poured directly onto the floor in a ribbon and spread out with a rubber squeegee to spread the material out and achieve the 100 sq. ft./gal. spread rate. Back roll the material smooth using a ⅜" lint free roller with a phenolic core to smooth out the finish. If rolling from a tray, apply at 8 mils/200 sq. ft./gal. spread rate.
